FZB Series Fluoroplastic Self Priming Pump for Corrosive Chemical Transfer
The FZB series fluoroplastic self priming pumps are a new generation of corrosion-resistant self-priming centrifugal pumps developed by Changyu Pump. Based on the traditional ZX and ZW self-priming centrifugal pumps and utilising IHF’s fluoroplastic lining technology, these pumps retain the self-priming capabilities of the ZX and ZW models while significantly enhancing corrosion resistance through the fluoroplastic lining process.
The flange design complies with national standards, and the shaft seal employs an advanced external bellows mechanical seal. The self-priming head can reach up to 5 meters, and installing a check valve at the bottom can increase this by an additional 1–2 meters. This centrifugal pump only needs to be filled with liquid before its first use. When the liquid level is below 1.5 meters, it offers advantages over submersible pumps, including lower cost, easier maintenance, longer service life, and lower operating costs.
|
Flow Range: |
2.5m³/ h-100m³/ h |
|
نطاق الرأس: |
15m~50m |
|
Nominal diameter range: |
25mm~100mm |
|
درجة الحرارة: |
-20°C~150°C |
|
Material of wetted parts: |
Fluoroplastics / FEP / PFA |
مقدمة
إن FZB Series fluoroplastic مضخة ذاتية التحضير from مضخة تشانغيو is a high-performance horizontal centrifugal pump specifically engineered for the transfer of highly corrosive chemicals. Unlike traditional pumps requiring manual priming, this series features an advanced self-priming chamber design, enabling an automatic suction lift of up to 5 meters after the initial liquid filling—a critical advantage for efficient and safe fluid handling from underground tanks or low-level sumps.
Built to withstand extreme chemical aggression, the FZB Series features wetted parts fully lined with premium fluoroplastics such as PTFE and FEP (F46). These materials offer exceptional corrosion resistance against any concentration of acids, alkalis, strong oxidizers, and organic solvents. The robust construction includes a cast steel outer casing and a silicon carbide mechanical seal that significantly reduces the risk of leakage and increases overall operational life. Whether applied in industrial sulfuric acid transfer, chemical wastewater treatment, or pharmaceutical processing, the FZB Series مضخة ذاتية التحضير delivers reliable, quiet, and low-maintenance performance in environments prone to severe corrosion.
Parts of Fluoroplastic Self Priming Pump
The FZB Series مضخة ذاتية التحضير features a robust horizontal structure with wetted parts fully lined in FEP(F46)/PTFE/PFA for extreme corrosion resistance. Key components include a cast steel casing, high-precision fluoroplastic impeller, and alumina ceramic shaft sleeve, all secured by an external bellows mechanical seal to ensure leak-free performance.
| Component | Material Selection | Functional Advantages |
|---|---|---|
| Pump Casing / Impeller | PTFE / FEP (F46) Lined | Resistant to 98% concentrated sulfuric acid corrosion |
| Mechanical Seal | Silicon Carbide – PTFE | Wear-resistant against particles, zero leakage |
| Shaft Sleeve | Alumina Ceramic | Corrosion resistance, high wear resistance |
AllSteel-Lined Pump Housing:
High-temperature annealed to prevent cracking; offers superior pressure resistance and no deformation; comes with a 10-year warranty.
Impeller:
Temperature-resistant up to 150°C; safe and reliable; features smooth flow channels for low resistance and high efficiency; corrosion- and wear-resistant; resistant to deformation.
Bearings:
- Imported bearings for smooth, friction-free operation: manufactured using European technology; genuine original parts; designed for long-term operation.
- High Speed: High-precision bearings with strong wear resistance and high rotational speeds
- Low Noise: High-end grease used inside the bearings effectively reduces noise
- High Wear Resistance: Internationally advanced salt bath heat treatment enhances the steel’s microstructure for increased wear resistance
- Long Service Life: Uses high-standard CGR15 bearing steel, offering a longer service life than standard bearings
Mechanical Seal:
Modified seal design for greater reliability; V-groove design with excellent elasticity ensures more stable performance
Notice: Trust our industrial-grade FZB Series fluoroplastic self priming pump to minimize operational downtime and lower your total cost of ownership in highly corrosive chemical applications. By utilizing a horizontal self-priming structure that allows for automatic suction up to 5 meters after the initial filling and advanced fluoroplastic linings (FEP/PFA), our engineering ensures a safer, more stable, and leak-free fluid handling environment for your most aggressive media.
البريد الإلكتروني: jade@changyupump.com
الهاتف +86-13651913727
Specifications: FZB Series Fluoroplastic Self Priming Pump
| Parameter Type | Specification / Range |
| Inlet/Outlet Diameter | 25mm – 100mm |
| Flow Rate (Q) | 2.5 ³/ h – 100 ³/ h |
| Head (H) | 15m – 50m |
| Self-Priming Height | 4m – 5m (Up to 7m with foot valve) |
| Operating Temperature | -20°C to 150°C |
| Lining Materials | FEP (F46), PFA |
| Casing Material | Cast Steel / HT200 Lined with Fluoroplastic |
| System Pressure | ≤1.6 MPa |
| Solid Content | < 5% (Non-crystalline particles) |
| Design Standards | GB/T5662, ISO2858, EN733, DIN24255 |
Customization & Configurations
To ensure the best performance for your specific corrosive chemical transfer needs, مضخة تشانغيو offers several derivative configurations:
- Explosion-proof Motor: Ex dⅡCT4 grade for hazardous environments.
- Heating Jacket: Prevents medium crystallization in low temperatures.
- Variable Frequency Drive (VFD): For precise flow control and energy efficiency.
Choosing the right configuration is critical for efficient corrosive chemical transfer. مضخة تشانغيو provides professional technical consultations to help you select the ideal FZB Series self priming pump based on your specific flow, head, and medium requirements. Whether you need explosion-proof motors or specialized heating jackets, our engineering team is ready to provide a customized fluid handling solution.
Contact us today for a precise model selection and professional quotation.
البريد الإلكتروني: jade@changyupump.com
الهاتف +86-13651913727
Working Principle of FZB Series Fluorine-lined Self-priming Pump
The FZB series utilizes an external-mix gas-liquid separation structure. Its core operation is defined by the process of “mixing, separation, and recirculation,” allowing the pump to evacuate air from the suction line without the need for a foot valve or manual priming after the initial setup.
1. The Priming Phase (Air Evacuation)
- Initial Charge: Before the first operation, the pump casing must be filled with liquid. This “priming liquid” is retained in the lower chamber for all future starts.
- Vacuum Creation: Upon startup, the high-speed rotation of the impeller flings the liquid toward the outer edge of the volute casing. This creates a low-pressure vacuum zone at the impeller eye (inlet).
- Gas-Liquid Mixing: Air from the suction pipe is drawn into the pump body due to the pressure differential. The impeller violently agitates the air and the priming liquid, creating a highly aerated gas-liquid mixture.
2. Gas-Liquid Separation
- The Separation Chamber: The mixture is forced into the oversized gas-liquid separation chamber at the top of the pump.
- Exhaust: Due to the sudden increase in flow area, the velocity drops significantly. The lighter air bubbles escape from the liquid and are discharged through the outlet pipe.
- Recirculation: The denser, degassed liquid sinks and returns to the impeller inlet via a dedicated recirculation port to pick up more air.
3. Normal Operation
- Continuous Cycle: This cycle repeats until all air is evacuated from the suction piping (reaching a self-priming height of up to 5 meters).
- Full Flow: Once the air is completely removed, the pump automatically transitions into a standard centrifugal operating mode, delivering a steady flow of corrosive media.
Advantages of the FZB Fluoroplastic Self Priming Pump
Superior Corrosion Resistance
Wetted parts are molded with PTFE/FEP (F46) linings, providing reliable resistance against any concentration of strong acids, alkalis, and organic solvents.
Leak-Free Precision Sealing
Equipped with external bellows mechanical seals and silicon carbide bushings, ensuring a zero-leakage environment and low-vibration operation under heavy loads.
Advanced 5m Suction Lift
The horizontal self-priming chamber enables an automatic suction lift of up to 5 meters. After the initial filling, it starts immediately without further priming.
Durable & Easy Maintenance
Metal-cased 2-3mm fluoroplastic lining with a back-pullout design for quick maintenance without disconnecting pipes.
Applications: Fluoroplastic Self Priming Pump
The Changyu Pump FZB Series is a line of corrosion-resistant self-priming centrifugal pumps that utilize fully fluoroplastic (such as PTFE and FEP) lining technology and are specifically designed for the transfer of highly corrosive, volatile, or high-purity media.
Chemical Industry
Transport of acids (sulfuric acid, hydrochloric acid), alkaline solutions, and organic solvents
Electroplating/Surface Treatment
Circulation and filtration of electroplating solutions and chemical plating solutions
Environmental Protection
Treatment of wastewater containing corrosive components and chemical dosing
Pharmaceuticals/Food
Transport of high-purity solvents (food-grade certified models required)
About Changyu Pump: Your Expert in Fluoroplastic Self Priming Pump Solutions
Established in 2006, Changyu Pump is a premier professional manufacturer specializing in high-performance self priming pump solutions. With decades of engineering expertise and ISO-certified manufacturing precision, our FZB Series is backed by multiple high-value utility model patents, ensuring that every unit delivers stable, zero-leakage performance in the most aggressive chemical environments.
Whether you are dealing with concentrated sulfuric acid transfer or volatile pharmaceutical solvents, our technical team provides customized adaptation schemes, including optimized self-priming chambers and specialized material configurations, to lower your total cost of ownership. As a direct factory, we guarantee industrial-grade durability and comprehensive technical support for your critical fluid handling needs.
Contact us today to get a professional technical assessment and discover why leading global industries trust Changyu Pump for their critical corrosive chemical transfer requirements.
Why Changyu Pump is Your Trusted Partner?
- Self Priming Pump Specialisation: Our R&D team continuously innovates in horizontal self-priming chamber design and fluoroplastic lining technology to extend the lifespan of every FZB Series pump.
- Advanced Quality Control: Each Fluoroplastic Self Priming Pump undergoes rigorous static and dynamic pressure testing, including vacuum suction verification, to ensure 100% hermetic sealing and performance before shipment.
- Global Supply Chain: As a direct factory established in 2006, Changyu Pump offers competitive pricing and customizable configurations for your corrosive chemical transfer requirements worldwide.
عرض المصنع
الأسئلة الشائعة
Project Showcases
مضخة تشانغيو has successfully deployed the Fluoroplastic Self Priming Pump in over 500+ industrial projects worldwide, ensuring safe fluid handling in extreme environments.
اطلب عرض أسعار مجاني
يُرجى ملء تفاصيل السائل الذي يتم ضخه، بما في ذلك التدفق والرأس والجاذبية النوعية ودرجة الحرارة، حتى نتمكن من التوصية بأفضل مضخة وتقديم عرض أسعار دقيق.