FZB Series Fluoroplastic Self Priming Pump for Corrosive Chemical Transfer
The FZB series fluoroplastic self priming pumps are a new generation of corrosion-resistant self-priming centrifugal pumps developed by Changyu Pump. Based on the traditional ZX and ZW self-priming centrifugal pumps and utilising IHF’s fluoroplastic lining technology, these pumps retain the self-priming capabilities of the ZX and ZW models while significantly enhancing corrosion resistance through the fluoroplastic lining process.
The flange design complies with national standards, and the shaft seal employs an advanced external bellows mechanical seal. The self-priming head can reach up to 5 meters, and installing a check valve at the bottom can increase this by an additional 1–2 meters. This centrifugal pump only needs to be filled with liquid before its first use. When the liquid level is below 1.5 meters, it offers advantages over submersible pumps, including lower cost, easier maintenance, longer service life, and lower operating costs.
|
Phạm vi lưu lượng: |
2.5m³/ h-100m³/ h |
|
Phạm vi đầu: |
15m~50m |
|
Nominal diameter range: |
25mm~100mm |
|
Nhiệt độ: |
-20°C đến 150°C |
|
Chất liệu của các bộ phận tiếp xúc với chất lỏng: |
Fluoroplastics / FEP / PFA |
Giới thiệu
The FZB Series fluoroplastic Bơm tự mồi từ Bơm Changyu is a high-performance horizontal centrifugal pump specifically engineered for the transfer of highly corrosive chemicals. Unlike traditional pumps requiring manual priming, this series features an advanced self-priming chamber design, enabling an automatic suction lift of up to 5 meters after the initial liquid filling—a critical advantage for efficient and safe fluid handling from underground tanks or low-level sumps.
Built to withstand extreme chemical aggression, the FZB Series features wetted parts fully lined with premium fluoroplastics such as PTFE and FEP (F46). These materials offer exceptional corrosion resistance against any concentration of acids, alkalis, strong oxidizers, and organic solvents. The robust construction includes a cast steel outer casing and a silicon carbide mechanical seal that significantly reduces the risk of leakage and increases overall operational life. Whether applied in industrial sulfuric acid transfer, chemical wastewater treatment, or pharmaceutical processing, the FZB Series Bơm tự mồi delivers reliable, quiet, and low-maintenance performance in environments prone to severe corrosion.
Parts of Fluoroplastic Self Priming Pump
The FZB Series Bơm tự mồi features a robust horizontal structure with wetted parts fully lined in FEP(F46)/PTFE/PFA for extreme corrosion resistance. Key components include a cast steel casing, high-precision fluoroplastic impeller, and alumina ceramic shaft sleeve, all secured by an external bellows mechanical seal to ensure leak-free performance.
| Component | Material Selection | Functional Advantages |
|---|---|---|
| Pump Casing / Impeller | PTFE / FEP (F46) Lined | Resistant to 98% concentrated sulfuric acid corrosion |
| Phốt cơ khí | Silicon Carbide – PTFE | Wear-resistant against particles, zero leakage |
| Shaft Sleeve | Alumina Ceramic | Corrosion resistance, high wear resistance |
AllSteel-Lined Pump Housing:
High-temperature annealed to prevent cracking; offers superior pressure resistance and no deformation; comes with a 10-year warranty.
Cánh quạt:
Temperature-resistant up to 150°C; safe and reliable; features smooth flow channels for low resistance and high efficiency; corrosion- and wear-resistant; resistant to deformation.
Bearings:
- Imported bearings for smooth, friction-free operation: manufactured using European technology; genuine original parts; designed for long-term operation.
- High Speed: High-precision bearings with strong wear resistance and high rotational speeds
- Low Noise: High-end grease used inside the bearings effectively reduces noise
- High Wear Resistance: Internationally advanced salt bath heat treatment enhances the steel’s microstructure for increased wear resistance
- Long Service Life: Uses high-standard CGR15 bearing steel, offering a longer service life than standard bearings
Phốt cơ khí:
Modified seal design for greater reliability; V-groove design with excellent elasticity ensures more stable performance
Thông báo: Trust our industrial-grade FZB Series fluoroplastic self priming pump to minimize operational downtime and lower your total cost of ownership in highly corrosive chemical applications. By utilizing a horizontal self-priming structure that allows for automatic suction up to 5 meters after the initial filling and advanced fluoroplastic linings (FEP/PFA), our engineering ensures a safer, more stable, and leak-free fluid handling environment for your most aggressive media.
Email: jade@changyupump.com
Điện thoại: +86-13651913727
Specifications: FZB Series Fluoroplastic Self Priming Pump
| Loại tham số | Thông số kỹ thuật / Dải sản phẩm |
| Đường kính đầu vào/đầu ra | 25mm – 100mm |
| Flow Rate (Q) | 2.5 ³/ h – 100 ³/ h |
| Head (H) | 15m – 50m |
| Self-Priming Height | 4m – 5m (Up to 7m with foot valve) |
| Nhiệt độ hoạt động | -20°C đến 150°C |
| Vật liệu lót | FEP (F46), PFA |
| Chất liệu vỏ | Cast Steel / HT200 Lined with Fluoroplastic |
| Áp suất hệ thống | ≤1.6 MPa |
| Solid Content | < 5% (Non-crystalline particles) |
| Design Standards | GB/T5662, ISO2858, EN733, DIN24255 |
Tùy chỉnh & Cài đặt
Để đảm bảo hiệu suất tối ưu cho thiết bị cụ thể của bạn vận chuyển hóa chất ăn mòn needs, Bơm Changyu offers several derivative configurations:
- Động cơ chống cháy nổ: Ex dⅡCT4 grade for hazardous environments.
- Heating Jacket: Prevents medium crystallization in low temperatures.
- Variable Frequency Drive (VFD): For precise flow control and energy efficiency.
Choosing the right configuration is critical for efficient corrosive chemical transfer. Bơm Changyu provides professional technical consultations to help you select the ideal FZB Series self priming pump based on your specific flow, head, and medium requirements. Whether you need explosion-proof motors or specialized heating jackets, our engineering team is ready to provide a customized fluid handling solution.
Hãy liên hệ với chúng tôi ngay hôm nay để được tư vấn lựa chọn mô hình phù hợp và nhận báo giá chuyên nghiệp.
Email: jade@changyupump.com
Điện thoại: +86-13651913727
Working Principle of FZB Series Fluorine-lined Self-priming Pump
The FZB series utilizes an external-mix gas-liquid separation structure. Its core operation is defined by the process of “mixing, separation, and recirculation,” allowing the pump to evacuate air from the suction line without the need for a foot valve or manual priming after the initial setup.
1. The Priming Phase (Air Evacuation)
- Initial Charge: Before the first operation, the pump casing must be filled with liquid. This “priming liquid” is retained in the lower chamber for all future starts.
- Vacuum Creation: Upon startup, the high-speed rotation of the impeller flings the liquid toward the outer edge of the volute casing. This creates a low-pressure vacuum zone at the impeller eye (inlet).
- Gas-Liquid Mixing: Air from the suction pipe is drawn into the pump body due to the pressure differential. The impeller violently agitates the air and the priming liquid, creating a highly aerated gas-liquid mixture.
2. Gas-Liquid Separation
- The Separation Chamber: The mixture is forced into the oversized gas-liquid separation chamber at the top of the pump.
- Exhaust: Due to the sudden increase in flow area, the velocity drops significantly. The lighter air bubbles escape from the liquid and are discharged through the outlet pipe.
- Recirculation: The denser, degassed liquid sinks and returns to the impeller inlet via a dedicated recirculation port to pick up more air.
3. Normal Operation
- Continuous Cycle: This cycle repeats until all air is evacuated from the suction piping (reaching a self-priming height of up to 5 meters).
- Full Flow: Once the air is completely removed, the pump automatically transitions into a standard centrifugal operating mode, delivering a steady flow of corrosive media.
Advantages of the FZB Fluoroplastic Self Priming Pump
Khả năng chống ăn mòn vượt trội
Wetted parts are molded with PTFE/FEP (F46) linings, providing reliable resistance against any concentration of strong acids, alkalis, and organic solvents.
Leak-Free Precision Sealing
Equipped with external bellows mechanical seals and silicon carbide bushings, ensuring a zero-leakage environment and low-vibration operation under heavy loads.
Advanced 5m Suction Lift
The horizontal self-priming chamber enables an automatic suction lift of up to 5 meters. After the initial filling, it starts immediately without further priming.
Bền bỉ và dễ bảo trì
Metal-cased 2-3mm fluoroplastic lining with a back-pullout design for quick maintenance without disconnecting pipes.
Applications: Fluoroplastic Self Priming Pump
The Changyu Pump FZB Series is a line of corrosion-resistant self-priming centrifugal pumps that utilize fully fluoroplastic (such as PTFE and FEP) lining technology and are specifically designed for the transfer of highly corrosive, volatile, or high-purity media.
Ngành công nghiệp hóa chất
Transport of acids (sulfuric acid, hydrochloric acid), alkaline solutions, and organic solvents
Electroplating/Surface Treatment
Circulation and filtration of electroplating solutions and chemical plating solutions
Environmental Protection
Treatment of wastewater containing corrosive components and chemical dosing
Pharmaceuticals/Food
Transport of high-purity solvents (food-grade certified models required)
About Changyu Pump: Your Expert in Fluoroplastic Self Priming Pump Solutions
Established in 2006, Changyu Pump is a premier professional manufacturer specializing in high-performance self priming pump solutions. With decades of engineering expertise and ISO-certified manufacturing precision, our FZB Series is backed by multiple high-value utility model patents, ensuring that every unit delivers stable, zero-leakage performance in the most aggressive chemical environments.
Whether you are dealing with concentrated sulfuric acid transfer or volatile pharmaceutical solvents, our technical team provides customized adaptation schemes, including optimized self-priming chambers and specialized material configurations, to lower your total cost of ownership. As a direct factory, we guarantee industrial-grade durability and comprehensive technical support for your critical fluid handling needs.
Hãy liên hệ với chúng tôi ngay hôm nay để nhận được đánh giá kỹ thuật chuyên nghiệp và tìm hiểu lý do tại sao các ngành công nghiệp hàng đầu thế giới tin tưởng lựa chọn máy bơm Changyu cho các nhu cầu vận chuyển hóa chất ăn mòn quan trọng của họ.
Tại sao Changyu Pump lại là đối tác đáng tin cậy của bạn?
- Self Priming Pump Specialisation: Our R&D team continuously innovates in horizontal self-priming chamber design and fluoroplastic lining technology to extend the lifespan of every FZB Series pump.
- Kiểm soát chất lượng nâng cao: Each Fluoroplastic Self Priming Pump undergoes rigorous static and dynamic pressure testing, including vacuum suction verification, to ensure 100% hermetic sealing and performance before shipment.
- Chuỗi cung ứng toàn cầu: As a direct factory established in 2006, Changyu Pump offers competitive pricing and customizable configurations for your corrosive chemical transfer requirements worldwide.
Triển lãm tại nhà máy
Câu hỏi thường gặp
Các dự án tiêu biểu
Bơm Changyu has successfully deployed the Fluoroplastic Self Priming Pump in over 500+ industrial projects worldwide, ensuring safe fluid handling in extreme environments.
Yêu cầu báo giá miễn phí
Vui lòng cung cấp chi tiết về chất lỏng được bơm, bao gồm lưu lượng, cột áp, tỷ trọng và nhiệt độ, để chúng tôi có thể đề xuất loại bơm phù hợp nhất và cung cấp báo giá chính xác.