Abrasive Slurry Pump | HB Series Stainless Steel Slurry Pump Manufacturer
The ChangyuPump HB Series Abrasive Slurry Pump is a high-efficiency, single-stage, single-suction horizontal centrifugal pump, designed in accordance with ISO 2858 and compliant with CE standards.
Built with an all stainless steel wetted structure, it is specifically engineered for abrasive slurry and medium-corrosive fluids, delivering stable performance, enhanced durability, and extended service life in demanding industrial environments.
|
Plage de débit : |
1,5 - 1660 m³/h |
|---|---|
|
Gamme de têtes : |
5.2 - 160 m |
|
Température : |
-20°C - 120°C |
|
Stress lié au travail |
≤1.6MPa |
Why Lined Slurry Pumps Fail in Real Applications
Handling abrasive slurry is not just about pumping liquid; it’s about surviving wear, temperature, and system instability.
Many conventional pumps struggle with:
- Rapid wear from solid particles
- Performance loss under high temperature
- Instability caused by pressure fluctuation and cavitation
- Increased maintenance due to material limitations
HB Series Stainless Steel Slurry Pump Solutions
It primarily addresses the issue of shortened pump service life caused by wear, corrosion, or blockages due to solid particles in the mining and metallurgical industries.
✔ Resists abrasive wear from particle-laden slurry (0.3–1 mm)
✔ Maintains stability under high temperature up to 180°C
✔ Strong metal structure reduces risks of cavitation and pressure impact
✔ Wide chemical compatibility for industrial and chemical processes
✔ Clean and anti-static design for safer and compliant operation
✔ Compatible with existing UHB systems – easy integration without redesign
✔ Longer service life with reduced maintenance frequency
Advantages of the Abrasive Slurry Pump
High Temperature Structural Integrity
Eliminates liner creep and deformation. Single-piece stainless steel casting ensures stable operation in abrasive slurry processes up to 180°C.
Broad Chemical/Solvent Compatibility
Prevents swelling and cracking. Provides comprehensive resistance against strong oxidizers and organic solvents where non-metallic materials typically reach their limits.
Superior Hard-Particle Resistance
Handles sharp, aggressive solids. The rigid metallic structure resists erosive wear and high-velocity fluid impact better than soft polymer linings.
Extended Mean Time Between Maintenance (MTBM)
Lower Total Owned Cost. Eliminates common lining failures like delamination or blistering, ensuring long-term reliability in heavy-duty industrial applications.
parts for Abrasive Slurry Pump
Featuring all-stainless-steel flow-through components, a semi-open impeller, and a high-rigidity structural design, the HB series maintains excellent resistance to wear and clogging, as well as stable operation even under complex operating conditions. The following are the main core components:
- Pump Housing (High-Rigidity, Pressure-Resistant Construction)
- Constructed from 304, 316L, or duplex stainless steel (customizable), the housing features high overall rigidity and excellent resistance to pressure and impact. Its smooth internal flow passages effectively reduce turbulence and erosion wear.
- Pump Cover (Reliable Sealing and Maintenance-Friendly Design)
- Precision-machined stainless steel construction ensures stable sealing performance and easy disassembly, effectively reducing maintenance complexity and downtime.
- Impeller (Semi-Open Anti-Clogging Design)
- Features a semi-open impeller with thickened blades and an optimized flow path design, capable of handling particles ranging from 0.3 to 1 mm in size. This reduces the risk of clogging and enhances the pump’s ability to handle slurries containing solids.
- Protective Covers / Wear Parts (Wear-Resistant, Replaceable Design)
- Critical wear parts feature a wear-resistant stainless steel design. The modular structure facilitates easy replacement, effectively extending the overall service life of the unit and reducing maintenance costs.
- Shaft and Bearing Assembly (Stable, Low-Vibration Operation)
- A high-strength shaft combined with heavy-duty bearing support, optimized for dynamic balance, reduces vibration and runout, ensuring long-term stable operation.
- Sealing System (Reliable Leak-Proof Design)
- Our proprietary high-performance mechanical seals (with multiple customizable options) are suitable for slurry and chemical applications, effectively preventing leaks and enhancing operational safety.
- Base Structure (Installation-Compatible Design)
- The rigid base structure is compatible with UHB pump installation systems, eliminating the need for modifications to piping or foundations and ensuring easy installation.
Roue
Pump Cover
Pump Housing
Garniture mécanique double
Paliers
Arbre de la pompe
Material Performance Comparison
Material Properties Overview
| Matériau | Corrosion Resistance (PREn) | Hardness (HB) | Application |
|---|---|---|---|
| 304 Stainless Steel | 18–20 | 150–180 | General industrial fluids |
| 316L Stainless Steel | 24–26 | 150–190 | Mild corrosive and chemical media |
| Duplex 2205 | 34–38 | 250–280 | Chloride-containing environments |
| Super Duplex 2507 | 42–45 | ≥300 | High corrosion and severe abrasion conditions |
Remarque : Plus élevé PREn values indicate stronger corrosion resistance, making 2507 and 2205 suitable for more aggressive and demanding slurry applications.
Reference for the PREN Calculation Formula:PREn=%Cr+3.3×(%Mo+0.5×%W)+16×%N
HB Series Abrasive Slurry Pump Specifications
| Paramètres | Spécifications |
|---|---|
| Type de pompe | Pompe centrifuge horizontale, monoétagée, à aspiration unique |
| Standard | ISO 2858 / CE compliant |
| Débit | Customized based on application |
| Tête | Customized based on operating conditions |
| Plage de température | De -20°C à 180°C |
| Applicable Particle Size | 0.3 – 1 mm |
| Solid Concentration | Medium-concentration slurry |
| Options de matériaux | 304 / 316L / 2205 / 2507 stainless steel |
| Pressure Capacity | ≥1.6 MPa |
| Type de roue | Roue semi-ouverte |
| Type de joint | Mechanical seal (optional configurations available) |
| Type d'installation | Compatible with the UHB system installation |
50HB Series Performance Parameters
| Modèle | Débit (m³/h) | Tête (m) | Vitesse (r/min) | Efficacité | Power (SG=1) | Diamètre de la roue (mm) |
|---|---|---|---|---|---|---|
| 50HB | 10 | 20 | 2900 | 26% | 4 kW-2 | 140 |
| 50HB | 20 | 15 | 2900 | 28% | 4 kW-2 | 140 |
| 50HB | 10 | 25 | 2900 | 20% | 4 kW-2 | 150 |
| 50HB | 20 | 20 | 2900 | 30% | 4 kW-2 | 150 |
| 50HB | 10 | 30 | 2900 | 20% | 5.5 kW-2 | 160 |
| 50HB | 20 | 25 | 2900 | 30% | 5.5 kW-2 | 170 |
| 50HB | 10 | 35 | 2900 | 20% | 5.5 kW-2 | 170 |
| 50HB | 20 | 30 | 2900 | 35% | 5.5 kW-2 | 170 |
| 50HB | 10 | 40 | 2900 | 20% | 7.5 kW-2 | 190 |
| 50HB | 20 | 35 | 2900 | 30% | 7.5 kW-2 | 190 |
Selection Guidelines
To ensure optimal performance, please provide:
- Flow rate (m³/h)
- Tête (m)
- Medium type (chemical composition)
- Solid content (%) and particle size
- Temperature (°C)
👉 Our engineers will recommend the most suitable configuration
Remarque : At Changyu, we provide one-on-one technical guidance and product recommendations tailored to your specific operating conditions. If you’re unsure how to choose this abrasive slurry pump, please contact our team.
Courriel : jade@changyupump.com
Téléphone : +86-13651913727
Abrasive Slurry Solutions
The HB Series Abrasive Slurry Pump is engineered for high-abrasion, high-solid-content,
and medium-corrosive slurry transport across multiple industries.
Mining
Transport of high-solid mineral slurry, tailings, and abrasive ore pulp in long-distance and high-head mining systems.
Industrie chimique
Transfer of abrasive chemical waste, catalyst slurry, and high-concentration corrosive industrial mixtures.
Power & Environment
Slurry transport in desulfurization systems, fly ash handling, wastewater sludge, and tailings recycling applications.
Special Conditions
Processing of quartz sand, mineral sand, and extreme abrasive-corrosive mixed slurry in severe industrial environments.
Stainless Steel vs Lined Slurry Pump
| Fonctionnalité | Pompe en acier inoxydable | PE Lined Pump (UHB) |
|---|---|---|
| Température | Up to 180°C | ≤80°C |
| Failure Mode | No liner failure | Peeling, bulging, cracking |
| Abrasion Resistance | High (hard metal) | Medium (soft PE) |
| Pressure Resistance | ≥1.6 MPa | ≤1.0 MPa |
| Chemical Resistance | Wide (except strong chloride acids) | Limited |
| Service Life | 5–10+ years | 1–3 years |
| Maintenance | Faible | High |
We offer a wide range of pump models in our product lineup: Produits. If you’re unsure which one to choose, feel free to nous contacter aujourd'hui.
HB Abrasive Slurry Pump Manufacturer – Changyu Pump
Changyu Pump specializes in the design and manufacturing of HB Series Abrasive Slurry Pump, providing high-performance solutions for abrasive, high-solid, and medium-corrosive slurry transport applications.
With advanced machining capabilities and strict ISO 2858 & CE-compliant quality control systems, we ensure every pump delivers stable hydraulic performance, long service life, and reliable operation under severe industrial conditions.
The HB series is engineered with an all stainless steel wetted structure, making it suitable for mining, metallurgy, chemical processing, power generation, and environmental protection industries where traditional lined pumps often fail due to wear or thermal limitations.
Courriel : jade@changyupump.com
Téléphone : +86-13651913727
Salon de l'usine
FAQ
Demande de devis gratuit
Veuillez indiquer les détails du liquide pompé, notamment le débit, la hauteur de chute, la densité et la température, afin que nous puissions vous recommander la meilleure pompe et vous fournir un devis précis.